LLL Logo Pendant
£16.80–£61.20 incl VAT and shipping
Commissioned and manufactured exclusively for LLLGB to celebrate the 60 years of LLL worldwide and 45 years of LLL in Great Britain, this beautiful metal pendant featuring the LLLI logo in a choice of two metalfinishes.
Each pendant measures 3cm high x 2cm across and comes in a bag with a black woven faux leather necklace.
Prices for this product include free shipping.
Two different finishes are available:
Stainless steel: £16.80 incl VAT and shipping
This robust pendant is 3D printed directly in metal, a process which leaves a slightly textured surface and gives each pendant an individual character (see below). Necklace and fabric gift bag included.
Sterling silver: £61.20 incl VAT and shipping
This cast pendant is lightly hand polished to achieve a smooth finish but still can have some surface texture. Necklace and soft cloth bag included.
Stainless steel pendant details
This robust pendant is 3D printed directly in metal leaving a textured surface.
Each pendant is individually 3D printed in 420 Stainless Steel infused with bronze, and has a final composition of approximately 60% steel and 40% bronze. The way that bronze infiltrates into the steel can vary, and this changes the colour of your product. If there is a higher concentration of Bronze near the surface of the product, it will take on more of Bronze's deep brown colour.
The 3D printer deposits small drops of glue onto layers of stainless steel powder, one layer at a time, until the print is complete. When removed from the printer the pendants are very fragile, similar to wet sand. They then go through an infusion process that replaces the glue with bronze, creating a full metal product which is then applied with sealant to complete the process.
Care: Stainless steel is a robust finish. However it is not completely corrosion-resistant and may tarnish.
Sterling silver pendant details
This pendant is lightly hand polished to achieve a smooth finish but still can have some surface texture.
3D Printed Sterling Silver products are made using a three-step process. The products are created with a lost-wax casting process using a high-resolution 3D wax printer. The 3D printed wax model is put in a container and liquid plaster is poured around it to create a mould. After the plaster sets, the wax is melted out and molten silver is poured into the plaster mould. The plaster is then pulled away to reveal the silver and the finished product is polished for a smooth surface.
Care: As with other precious metals, the polished surface of silver is soft, so scrapes and scratches are to be expected as a normal part of wear. To minimize damage and ensure your product lasts a lifetime, we recommend storing your jewellery or other products in a soft cloth pouch and away from other products. Avoid exposing the product to household chemicals during cleaning as they can be damaging to the finish. Use a silver polishing kit to maintain a glossy surface.